SATO 400, 410 manual WLa, XLa, XBa, YEa

Appendix A: Command Quick Reference

INSTRUCTION	DESCRIPTION				PAGE
WLa	Font type. Specifies the 28W x 52L dot matrix font (including				Page 4-40
	decenders).
	a	=	0	Disables auto-smoothing of font
			1	Enables auto-smoothing if expansion is greater than 3
XM	Font type. Specifies the 24W x 24H dot matrix font (including				Page 4-34
	descenders).
XS	Font type. Specifies the 17W x 17H dot matrix font (including				Page 4-34
	descenders).
XU	Font type. Specifies the 5W x 9L dot matrix font (including				Page 4-34
	descenders).
XLa	Font type. Specifies the 48W x 48L dot matrix font (including				Page 4-40
	descenders).
	a	=	0	Disables auto-smoothing of font
			1	Enables auto-smoothing if expansion is greater than 3
XBa	Font type. Specifies the 48W x 48L dot matrix font (including				Page 4-40
	descenders).
	a	=	0	Disables auto-smoothing of font
			1	Enables auto-smoothing if expansion is greater than 3
YC	Cut Last. Cuts last printed label and retracts head to print position.				Page 4-33
YEa	Label/Tag Select. Selects the operation of the “Paper Out” signal.				Page 4-51
	a	=	0	Label selection. Print tops upon detection of Paper Out.
			1	Tag selection. Print stops after label is printed.
Z	Stop Code. Ends all print jobs.				Page 4-70
%a	Rotate. Fixed Base Reference Point. Rotates printing in 90°				Page 4-67
	increments without changing the base reference point.
	a	=	0	Sets print to normal direction
			1	Sets print to 90° CCW
			2	Sets print to 180° rotated (upside down)
			3	Sets print to 270° CCW (90° CW)

SATO CT Series Printers 9001069A Page A-9