SWITCHES AND SENSORS CL608e and CL612e
Ribbon End Sensor: This sensor is a motion detector that signals the printer
when the ribbon supply is turning.
Head Open Switch: When the print head is opened, this switch is activated
and the printer will stop printing.
Label Sensor Unit: This sensor unit contains two types of sensors, one for
label gap and one for Eye-Mark sensing.
Page 2-18 PN9001074 Rev. B SATO CL Series “e” Printers
Section 2. Installation
Ribbon
Motion
Sensor
Label Sensor
Unit
CL608 and CL612 Label Sensor Positioning
0.33" (9 mm) Eye-Mark Sensor
1.0" (25 mm) to 3.5" (90 mm)
Label Gap Sensor
Min. Inter-Label Gap
0.12" (3 mm)
Backing
Paper Inside
Edge
Label Inside Edge
Label
Feed
Direction
Miminum Eye-Mark Size
.12 in (3 mm) W x .24 in. (6 mm) L