Cover/Slip Sheet
Cover/Slip Sheet
Using this function, you can add or insert cover or paper designate.
There are four types in this function:
❖Front Cover
The first page of your originals is copied on a specific paper sheet for covers. | 2 |
|
❖Front/Back Covers
The first and last pages of your originals are copied on specific paper sheets for covers.
❖Paper Designate
Use this function to have certain pages of your original copied onto slip sheets.
❖Chapters
If you specify the first page of each chapter with this function, those pages will always appear on the front of copies when using 1 sided → 2 sided mode.
Preparation
Before selecting this function, set the tray for front cover paper and slip sheet paper. See “Cover”, “Slip Sheet 1” and “Slip Sheet 2” in the System Settings manual.
The cover or slip sheets should be identical in size and direction with the copy paper.
Limitation
❒You cannot set the copy paper in the bypass tray. Only set the cover or slip sheets in the bypass tray.
Note
❒If Blank mode is selected, the cover will not be counted as a copy.
Front Cover
The first page of your originals is copied on specific paper sheet for covers, or a cover sheet is inserted before the first copy.
151
