Savin 2555 manual Slip Sheets, When using OHP transparencies set on the bypass tray, 162

Copying

Slip Sheets

Every time the original's page changes, a slip sheet is inserted. This function can be used to insert a slip sheet automatically between each OHP transparency cop- ied or used as a stack function. You can also copy onto the inserted slip sheets.

2

	1
1	2
2
3	3

Preparation

Before selecting this function, specify the paper tray for slip sheets. See “Slip Sheet 1”, “Slip Sheet 2” in the System Settings manual.

Limitation

❒ You cannot use this function with Chapters and Paper Designate modes. ❒ In Connect Copy mode, you cannot use the non-standard size paper.

Note

❒ Set the slip sheets in the same orientation as originals.

❒ You can specify whether to make copies onto the inserted slip sheets or not.

❒ If you do not copy onto slip sheets, they are excluded from the number of cop- ies counted.

❒ In Connect Copy mode, specify the paper settings before you press the [Con- nect] key.

When using OHP transparencies set on the bypass tray

❖ Blank
1 2	2 1

162