Sceptre Technologies Sceptre X42 specifications Media Box Rear View Connector Definitions

Media Box Rear View Connector Definitions

1.Signal Connector

This connector provides video signals to the display panel and has to be permanently connected. This connection uses propriety cable.

2.Inverter Connector

This connector provides power to the display panel and has to be permanently connected. This connection uses propriety cable.

3.TV Speaker

This connection port is for connecting the TV’s speakers and provides sound signals to the TV’s speakers. This connection uses speaker wires.

4.ATSC Tuner

This connection port is for connecting digital cable or high definition antennas. The tuner will tune to unscrambled digital cable channels or over the air wave high definition local channels. This connection port uses coaxial cable.

5.Headphone Out

This connection port is for people who want to use a headphone with the TV. The connection port uses a 3.5mm mini-jack audio cable.

6.IR Connector

This connector receives remote control commands from the display panel’s IR sensor and has to be permanently connected. This connection uses propriety cable.

7.PC Audio In

This connection port is for people who want to provide audio to the TV when using devices such as PC or set-top box with a DVI output. The sources it provides audio for are HDCP, DVI, VGA-PC, or VGA-YPbPr2. For PC connection you would plug the provided 3.5mm mini-jack audio cord into your PC sound card and this port. For A/V devices such as DVI set-top box or DVI DVD player, you would use a RCA red/white to 3.5mm mini-jack cable for audio.

8.HDMI (High Definition Capable)

This connection port receives audio and high definition signal through one single

cable. It also doubles as HDCP source and DVI source with the provided HDMI

Page22 SCEPTRE X42