Sceptre Technologies Sceptre X42 specifications Picture Quality of All Connections from Ok to Best

video, and a subwoofer cable for bass.

13.AV1 & AV2

These connection ports are used for connecting composite devices, such as VCR, DVD player, game console, or set-top box via AV1 or AV2 source. Use the connectors white (L) and red (R) for audio and the yellow (AV) for video. You can also substitute the yellow (AV) by using the black connector (S-VIDEO) for a better picture. Please note you can only connect one type of video connector at a time. Please do not connect both S-VIDEO and AV at the same time. This connection uses RCA audio cable for sound, composite cable for video or s-video cable for video.

14.TV Tuner

This connection port is used for connecting antenna, satellite box or cable service via TV source. If you are using a satellite box select cable as your cable/air setting. If you are connecting for cable service or antenna please don’t forget to switch for the correct setting under TV setup and scan for the channels. This connection uses coaxial cable.

15.AC Power

This connection is for providing power to the media box. This connection uses a standard computer power cord.

16.Power Switch

This switch is the hardware switch for cutting power on / off for the media box and

the display panel. Normally it should be left on. With the power switch at the

on position, the TV still needs to be turned on via either the Power button on the remote or the Power button on the side of the TV. If you have cut the power off please let the TV rest for 10-20 minutes before cutting the power back on.

Picture Quality of All Connections from Ok to Best

1.TV Tuner (OK) Analog video - 480i.

Page24 SCEPTRE X42