Sceptre Technologies Sceptre X42 specifications For Hdtv Antenna Atsc Tuner Users, Page38

For HDTV Antenna ATSC Tuner Users

Note: The following instruction set is for ATSC Tuner HD antenna users only. Only perform the following instruction set when you have connected a HD antenna to the ATSC tuner. ATSC tuner does not guarantee HD picture quality. HD picture still depends on the method which your local channels broadcast their TV signal.

1.Make sure your HDTV antenna is connected to the ATSC Tuner port NOT the tuner labeled TV Tuner.

2.Press the “SOURCE PC” button on the remote controller to select the TV input signal labeled “DTV”

3.Press MENU button to activate the On Screen Display (OSD) menu

4.Press “VOL+/-“ button to select the “DTV” function group

5.Press “←”(button in the center of VOL +/- & CH +/-) to enter the DTV sub functions.

6.Enter “0000” for the password to enter “Channels” function

7.Press “CH +/-“ button to select “Channel Scan” function and then

press“←”(button in the center of VOL +/- & CH +/-) to perform channel scanning to obtain all available channels.

8.To navigate in between channels you can only use the “CH +/-“ buttons or the

“EPG” button.

Pressing the “EPG” button more than once will toggle in between regular channel program and sub channel program.

Page38 SCEPTRE X42