Sceptre Technologies X270 user manual Switching a

Problems	Solutions
SWITCHING A	Different channels and inputs will sometimes have this effect
CHANNEL OR	because the channel signal’s own volume is already loud.
SOURCE CHANGES	There is no way remove this completely. The TV has an
THE VOLUME	AUTO VOLUME LEVEL function that can combat this type of
	effect. Please make sure that function is turned on.
THERE IS NOISE OR	When your LCD HDTV’s resolution is higher than the digital
TRASH PIXELS ON	channel’s broadcast resolution, the signal is up-converted to
THE SCREEN	match your TV’s resolution. Up-converting can cause this type
	of effect.
TIPS FOR HIGH	The X270 LCD HDTV is an ideal platform for viewing High
DEFINITION USERS	Definition Content. The best image quality can be achieved by
	HDMI, YPbPr (Component), then VGA. However, due to
	variances in broadcast practices, it is possible some image
	distortions can occur.
TIPS FOR	Letterboxed (Widescreen) versions of DVD movies are most
LETTERBOX	commonly formatted for standard 4:3 TVs. The X270 LCD
CONTENT USERS	HDTV has the capability of expanding this content so the
	entire screen is filled at the expense of the image proportion.
	To use this function press the aspect button on the remote
	control and cycle among the available options.
I CANNOT FIND THE	The buttons are represented by the ▲▼◄► buttons located
VOLUME AND	on the remote control. ▲▼ changes the channels and ◄►
CHANNEL	changes the volume.
CHANGING
BUTTONS
I CANNOT FIND	The enter button has the symbol ↵. It is located in the center
ENTER BUTTON	of the ▲▼◄► buttons.
TV TURNS OFF	The TV features a power saving mode which will automatically
AUTOMATICALLY	turn off the TV, if there’s no signal provided for more than 5
AFTER 5 MINUTES	minutes.

- 49 -

www.SCEPTRE.com

SCEPTRE X270 HDTV User Manual