Schlage SRP-275 user manual DIP Switch setting for CitizeniDP 3550 mode

				SRP-275
3-1-2 DIP Switch setting for Citizen(iDP 3550) mode
• DIP Switch 1
Switch	Function	ON	OFF		Default
1-1	Emulation Selection (*1)	Refer to the following table			OFF
1-2
1-3	Auto cutter	Enable	Disable		OFF
1-4	CBM command	CBM2 mode	CBM1 mode		OFF
		(iDP3530 system)	(iDP3540 system)
1-5	International characters (*2)	Refer to the following table			ON
1-6
1-7
1-8	CR mode	CR	CR+LF		OFF

• DIP Switch 2 (RS232C serial interface model)

Switch		Function			ON	OFF	Default
2-1	Word length				8 bits	7 bits	ON
2-2	Parity check				Disable	Enable	ON
2-3	Parity selection				ODD	EVEN	ON
2-4	Hand shaking			DTR/DSR		XON/XOFF	ON
2-5	Baud rate selection (*3)				Refer to the following table		OFF
2-6
2-7	Near end switch				Enable	Disable	OFF
2-8	Mechanism type				Graphic	Character	OFF
NOTES
(*1) Emulation Selection (DSW 1-1 and 1-2)
Emulation		1-1	1-2
EPSON		OFF	OFF
STAR		OFF	ON
CITIZEN		ON	OFF
EPSON-KP		ON	ON

- EPSON-KP(EPSON Kitchen Printer mode) : A alarm is generated by printer after auto cutting and in paper end error.

(*2) International Character Selection

No.	DSW 1-5	DSW 1-6	DSW 1-7		Code page
Country
U.S.A.	ON	ON		ON	Page 0 (PC437 : U.S.A.)
France	OFF	ON		ON	Page 2 (PC850 : Multilingual)
Germany	ON	OFF		ON
U.K.	OFF	OFF		ON
Denmark	ON	ON	OFF		Page 5 (PC865 : Nordic)
Sweden	OFF	ON	OFF
Italy	ON	OFF	OFF		Page 2 (PC850 : Multilingual)
Windows Code	OFF	OFF	OFF		Windows Code
(*3) Baud rate selection (Transmission speed)
Transmission	2-5	2-6
2400 baud	ON	ON
4800 baud	OFF	ON
9600 baud	OFF	OFF
19200 baud	ON	OFF

Rev. 1.01 - 15 -