Manuals / Schneider Electric / Computer Equipment / Network Card

Schneider Electric 170AMM11030 manual Register for Inputs, Output Operating Range, Overview

Models: 170AMM11030

1 22

Page 16

Range	Output Operating Range

		Output Voltage	Data is Left Justified		Comment

	Output Range	-10.000 ... +10.000	00382	... 32382	Nominal output voltage
					range

	Output Over Range	+10.000 ... +10.238	32384 ... 32764		Linear over range
					output voltage

	Output Out of Range	≥10.238	32766		Threshold limited to
			(7FFE Hex)		32766 decimal

	Output Under Range	-10.238 ... -10.000	00002 ... 00382		Linear under voltage
					range

	Output Out of Range	≤-10.238	00000		Threshold limited to
					00000

Register for Inputs

Overview	The input register is arranged as follows.

	Word		Function

	1		Status word (module status)

	2		State of the 16 discrete inputs

	3		Analog input word channel 1

	4		Analog input word channel 2

	5 ...	8	Not used

16	31005009 01 November 2003

Page 16

Image 16

Schneider Electric 170AMM11030 Register for Inputs, Output Operating Range, The input register is arranged as follows

Contents

170AMM11030 Analog/Digital Momentum I/O Base User Guide Version31005009 PLEASE NOTE Safety InformationDANGER 170AMM11030 Analog/Digital Momentum I/O Base Front Panel ComponentsOverview This document contains the following topicsComponents of the I/O Module LED Illustration The illustration below shows the LEDsThe following table describes the LEDs DescriptionsSpecifications SpecificationsGeneral output is protected against short-circuiting and overload250 VAC @ 47 to 63 HZ or 250 VDC channel Common Mode Rejection Ration @ 50/60Number of Channels Discrete VDC outputs incorporate thermal shutdown and overload protection Physical Dimensions Internal Pin ConnectionsOverview IllustrationField Wiring Guidelines ConnectorSchneider Electric sells terminal connectors in sets of three 170AMM11030 Momentum I/O baseWiring Diagrams discrete input and output analog input and outputDiscrete I/O DevicesConfiguration I/O MapAnalog I/O Recommended fuses F3 Use a 1A fuse, Wickman 19181-1A or equivalentappropriate information in output words 1 through 5 as follows Register for OutputsOverview including those defined as not used, will enable the module Failure to follow this precaution can result in injury or equipmentValid setting for word one are 0001 ... FFFF The module’s default value at power-up for this register is zero4x Registers Words 4channel Discrete Output RegisterRegister for Inputs RangeOutput Operating Range The input register is arranged as followsset to an OFF state Discrete Input RegisterThis word contains a right justified binary 16 bit data field WordWords 3 Analog Input RegisterWords 5 Words 5 ... 8 are not usedAnalog Map OverviewInput Outputpoints are field wired to row Discrete I/O Points and IEC Compliant Data MappingOverview 31005009 01 NovemberRanges and Decimal Values Input Measuring Range ±10 Input and Output Ranges31005009 01 November Output Measuring Range ±10 31005009

Range

Output Operating Range

Register for Inputs

The input register is arranged as follows.