Map, Analog I/O | Schneider Electric 170AMM11030 specification

Analog I/O	The diagram below shows field wiring for analog input and analog output devices.
Devices

Row 2

AI2 AO1- AO2- M-

16-42 VDC

16-42 VDC Return

Row 3

Row 4

−

Analog Sensor

Analog Actuator

(Input Devices)

(Output Devices)

Recommended fuses:

F3: Use a 1A fuse, Wickman 19181-1A or equivalent.

I/O Map

I/O Map Module	The module must be I/O mapped as 8 contiguous input words and 8 contiguous
Configuration	output words.

12	31005009 01 November 2003

Image 12

Contents

170AMM11030 Analog/Digital Momentum I/O Base User Guide Version Safety Information 170AMM11030 Analog/Digital Momentum I/O Base Front Panel ComponentsOverview Front Panel Components of the I/O Module LED Illustration The illustration below shows the LEDsFollowing table describes the LEDs Descriptions Specifications SpecificationsGeneral Output is protected against short-circuiting and overload To ground Number of Channels Output Ranges Type of Signal Fault SensingFault Reporting Operating Voltage Physical Dimensions Internal Pin ConnectionsTerminals on the I/O base and an optional busbar Field Wiring Guidelines Wiring Diagrams Discrete input and output analog input and outputDiscrete I/O Devices Map Analog I/O Register for Outputs Word Function Word Zero is an illegal value for the parameter field wordsDamage 4x Registers Words 4 Register for Inputs RangeOutput Operating Range Input register is arranged as follows Set to an OFF state Discrete Input RegisterBits Description Words 3 Analog Input RegisterWords 5 Words 5 .. are not used Analog Map Input WordOutput Word Points are field wired to row Discrete I/O Points and IEC Compliant Data Mapping Input and Output Ranges Ranges Decimal Values Input Measuring Range ±10 Output Measuring Range ±10