UPS Network Management Card 2 User’s Guide18
exit
Access: Administrator, Device User
Description: Exit from the command line interfa ce session.
format
Access: Administrator only
Description: Reformat the file system of the NMC and erase all security certificates, encryption keys,
configuration settings, and the event and data logs. Be careful with this command.
To reset the NMC to its default configuration, use the resetToDef command.
ftp
Access: Administrator only
Description: Enable or disable access to the FTP server. Optionally, change the port setting to the number

of any unused port from 5001 to 32768 for added security.

Example: To change the TCP/IP port to 5001, type:
ftp -p 5001
help
Access: Administrator, Device User
Description: View a list of all the CLI commands available to your account type. To view help text for a

specific command, type the command followed by help.

Example 1: To view a list of commands available to someone logged on as a Device User, type:
help
Example 2: To view a list of options that are accepted by the alarmcount command, type:
alarmcount help
netstat
Access: Administrator, Device User
SPACEBAR View the next page of the event log.
BView the preceding page of the event log. This command is not available at the main page of the
event log.
DDelete the event log. Follow the prompts to confirm or deny the deletion. Deleted events cannot
be retrieved.
Option Argument Definition
-p <port number> Define the TCP/IP port that the FTP server uses to communicate with the NMC
(21 by default). The FTP server uses both the specified port and the port one
number lower than the specified port.
-S enable | disable Configure access to the FTP server.
Key Description