21UPS Network Management Card 2 User’s Guide
Example 2: To enable RADIUS and local authentication, type:
radius -a radiusLocal
Example 3: To configure a 10-second timeout for a secondary RADIUS server, type:
radius -t2 10
reboot
Access: Administrator
Description: Restart the interface of the NMC.
resetToDef
Access: Administrator only
Description: Reset all parameters to their default .
Example: To reset all of the configuration changes except the TCP/IP settings for the NMC, type:
resetToDef -p keepip
snmp, snmpv3
Access: Administrator only
Description: Enable or disable SNMP 1 or SNMP 3.
Example: To enable SNMP version 1, type:
snmp -S enable
system
Access: Administrator only
Description: View and set the system name, the contact, the location and view up time as well as the dat e

and time, the logged-on user, and the high-level system status P, N, A (see “Main screen status fields”).

Example 1: To set the device location as Test Lab, type:
system -l “Test Lab”
Option Arguments Description
-p all | keepip Reset all configuration changes, including event actions, device settings, and,
optionally, TCP/IP configuration settings.
Option Arguments Description
-S enable | disable Enable or display the respective version of SNMP, 1 or 3.
Option Argument Description
-n <system name> Define the device name, the name of the person responsible for the device,
and the physical location of the device.
Note: If you define a value with more than one word, you must enclose the
value in quotation marks.
These values are also used by InfraStruxure Central and the NMC’s SNMP
agent.
-c <system contact>
-l <system lo cation>