27UPS Network Management Card 2 User’s Guide
xferINI
Access: Administrator only. This command only works through serial CLI.
Description: Use XMODEM to upload an .ini file wh ile you are accessing the command line interfa ce
through a serial connection. After the upload completes:
• If there are any system or network change s, the command line interface restarts, and you must log on
again.
• If you selected a baud rate for the file transfer t hat i s not t he same as the default baud rate for the NMC,
you must reset the baud rate to the default to re-e stablish communication with the NMC.
xferStatus
Access: Administrator only
Description: View the result of the last file transfer.
See “Verifying Upgrades” on page80 for descriptions of the transfer result codes.