UPS Network Management Card 2 User’s Guide72
Device IP Configuration Wizard

Capabilities, Requirements, and Installation

How to use the Wizard to configure TCP/IP settings

The Device IP Configuration Wizard configures the IP address, the subnet mask, and the default gateway of
one or more Network Management Cards or network-enabled devices (devices containing an embedded UPS
Network Management Card 2 (NMC)).
The Wizard is for IPv4 only. For detailed information on the Wizard, see the Knowledge Base on
the support page of the www.apc.com website and search for 3061 (the ID of the relevant article).
To use the DHCP Option 12 (AOS 5.1.5 or higher), see Knowledge Base ID 8853.

System requirements

The Wizard runs on Microsoft Windows 2000, Windows Server® 2003, and on both 32- and 64-bit versions of
Windows XP, Windows Vista, Windows 2008, and Windows 7 operating systems.

Installation

To install the Wizard from the Utility CD:
1. If autorun is enabled, the user interface of the CD starts when you insert the CD. Otherwise, open the
file contents.htm on the CD.
2. Click Device IP Configuration Wizard and follow the instructions.
To install the Wizard from a downloaded executable file:
1. Go to www.apc.com/tools/download.
2. Download the Device IP Configuration Wizard.
3. Run the executable file in the folder to which you downloaded it.