IO/20 | EXERCSE | BKE | MAINTENANCE |
| |
|
| [] | Moving | your 10/20 | bike |
|
| Carefully lift the horizoetal rear floor support to move and steer | |||
|
| the 20 bike to another location (Fig. A). Pull the handlebars | |||
|
| towards you, leaning the bike down, to move and steer the 10 | |||
|
| bike to another location (Fig. B). Be gentle while moving the unit | |||
|
| as any sharp impact directly or indirectly to the computer can | |||
|
| affect computer operation. |
| ||
|
| [] | DaiJy | maintenance |
|
|
| Use a damp cloth to wipe your bike and computer free of sweat. | |||
| _ | IMPORTAN_ To avoid damaging | the finish on your bike and | ||
computer, never use a
!RepJacing the batteries
If the console does not power up, replace the batteries in the back of the console with fresh Gcel[ batteries. Insert the
batteries as indicated in the battery bay.
NOTE: If you prefer, you may power the bike with a Class 2
Transformer AC Adapter. The adapter plugs into the DC Connector
Jack on the back of the console.
The adapter must be purchased separately and can be obtained from many electronic stores.
The AC adapter specifications are:
AC ADAPTER
JCLASS2TRANSFORMER
I'_ HNPUT: 120MAC 60Hz 5.7V
[_;_ I OUTPUT: 6VDC 500mA
,,INPU]! AC 120v 60Hz 5.7W
,,OUTPLFRDC 6V 500mA
,,DC PLUG:
Outer Diameter 5.5 ± 0.1
Internal Diameter 2.1 ± 0.1
Length 10 ± 0.1
DC Wire Length 71 in. (180cm) Wire Diameter 24AWG
The DC Connector Jack configuration:
,,Outside: Negative
,,Inside: Positive
15
