SERVICE
A
MX1567
2.Turn oil dipstick (A) 1/4 turn counterclockwise. Remove dipstick and wipe it with a clean cloth.
IMPORTANT: Avoid damage! If oil level is below the ADD mark, DO NOT run the engine.
3.Install dipstick. Turn dipstick 1/4 turn clockwise and tighten.
B
M61459
4.Remove dipstick. Check oil level. Oil level MUST BE between ADD and FULL marks. If not, pour oil into dipstick tube to bring level to FULL mark (B).
5.Install and tighten dipstick.
Changing Engine Oil
CAUTION: Avoid injury!
•Used oil may harm environment and people if it is dumped on the ground or into a drain or a body of water. Call your local Recycling Center or authorized Scotts servicing dealer to learn how to recycle used oil.
•Engine may be hot, use caution to avoid burns to the hands.
IMPORTANT: Avoid damage!
•Change oil after first 5 hours of operation.
•Change oil while engine is warm.
•If mower is not operated 25 hours during the mowing season, change oil before storing mower.
•Help prevent air cleaner damage and hard starting, turn mower onto the LEFT side when servicing.
NOTE: Two different methods can be used for changing the engine oil. Both options are acceptable service procedures based on customer preference.
TO CHANGE ENGINE OIL FROM THE TOP:
1.Park mower on a level surface.
2.Run engine until fuel tank is empty or near empty.
3.Stop engine and disconnect spark plug wire.
A
MX1567
4.Turn oil dipstick (A) 1/4 turn left and remove from the filler tube.
B |
M87111d |
5.Insert plastic drain tube (B) firmly inside filler tube opening.
6.Place a drain pan on the left side of the mower.
Service - 15
