OPERATING
Using Side Discharge Chute
CAUTION: Avoid injury! DO NOT operate mower unless grass bag assembly, side discharge chute or mulch guard is in place.
1. Release blade control lever to stop engine.
A
B
MX1566
2. Remove mulch guard knob (A).
B
C
A
MX1570
3.Lift and hold spring loaded mulch guard (B) up.
4.Install side discharge chute (C).
•Slide side discharge chute under mulch guard mounting bracket.
•Lower mulch guard.
•Reinstall and tighten knob (A).
Using Grass Bag
CAUTION: Avoid injury! DO NOT operate mower unless mulch guard, side discharge chute or grass bag and bagging chute are in place.
Bagging chute MUST be removed and mulch guard secured in place when grass bag is not being used.
NOTE: Bag may wear and deteriorate. Check condition of bag often. Use a John Deere bag or equivalent to comply with safety specifications.
1.Release blade control lever to stop engine.
2.Grasp handle (A) and handle (B) from left side of mower. Lift bag off mower.
A
B
M96549
3.Lower front of bag. Raise rear of bag grasping handle
(A) and handle (B).
C M96558
4.Allow doors (C) to swing open. Shake contents of bag to empty out.
Mowing Tips
Before beginning to mow, be sure deck is level and proper cutting height is selected.
Operating - 9
