Scotts SP6213 Adjusting Handle Height, Key Cutting Height Adjustments In mm Inches, Upper Handle

OPERATING

F E D C

GB

A

		M87101
Key	Cutting Height Adjustments In mm (Inches)
(A)	25 mm (1 in.)
(B)	38 mm (1-1/2 in.)
(C)	50 mm (2 in.)
(D)	64 mm (2-1/2 in.)
(E)	75 mm (3 in.)
(F)	90 mm (3-1/2 in.)
(G)	102 mm (4 in.)

F E D C

GB

A

M87102

Adjusting Handle Height

Upper Handle:

NOTE: Upper handle height can be independently adjusted to two positions.

A

B

M92146

1.Remove knob (A) and bolt (B) from each side of upper handle.

2.Move handle to desired height.

3.Install bolt through matching holes in upper and lower handles on each side.

4.Install and tighten knob (A).

Lower Handle:

NOTE: Lower handle height can be independently adjusted to three positions.

C

D

E

M88835

1.Loosen knob (C) approximately 25 mm (1 in.) on each side of handle.

NOTE: Carriage bolts must travel within slotted adjustment brackets and come to rest within one of the three height setting positions (E) before tightening.

2.Pivot handle to a desired height within slotted adjustment bracket (D).

Operating - 6