Remove Mower from Storage

STORING MACHINE

M87116a

3.Loosen knob (B) 25 mm (1 in.) on each side. Allow upper handle (C) to pivot down.

M88835

4. Remove knob (D) and carriage bolt (E) from each side.

M96553

5.CAREFULLY fold lower handle (F) forward. Guide cables inside lower handle. DO NOT CRIMP CABLES.

6.Install bolts and knobs in lower handle.

1.Unfold handles. Tighten knobs. Do not crimp cables.

2.Check engine oil level.

3.Connect wire to spark plug.

4.Inspect shields, safety devices and hardware.

Storing Machine - 28

Page 32

Image 32

Scotts SP6213, SP6211 manual Remove Mower from Storage

Contents

OPERATOR’S Manual Using Your Operator’s Manual IntroductionThank You for Purchasing a Scotts Product California Proposition 65 Warning Product Identification Record Identification Numbers Table of Contents Machine Safety Labels SafetySafety-Alert Symbol Certification Label Operate Safely Help Prevent Serious or Fatal Accidents Practice Safe MaintenanceProtect Children Before you unplug or adjust machine Avoid Injury from Contacting BladeHandling Waste Products Handling Fuel Safely Operating Engine Controls Handle and Cutting Height ControlsHandle Controls Stop Engine Adjusting Handle Height Key Cutting Height Adjustments In mm InchesUpper Handle Lower Handle Keep hands, feet and clothing away from the blade Starting EngineRUNNING, Blade is Turning Stopping Engine Forward TravelTravel Speeds Mowing Tips Using Side Discharge ChuteUsing Grass Bag To Avoid Scalping Bagging and CompostingBagging Tips Mulching Tips After Mowing Replacement Parts Service LiteratureJohn Deere Quality Part Number Service Intervals Service Engine Warranty Maintenance Statement Engine OilAdjusting Carburetor Avoid Fumes Changing Engine Oil To Change Engine OIL from the TOP Cleaning and Replacing Air Cleaner Element To Change Engine OIL from the Bottom Stop engine. Let it cool Cleaning and Gapping Spark PlugCleaning Engine Cooling Fins Cleaning Drive Belt and Transmission Area Checking and Replacing Drive Belt To Replace Drive Belt Picture Note View is from underside of differential Transmission Cable Adjustment-SP6213 Lubricate Drive Shaft Hub Bushings Lubricate Mower Axles Check Blade Sharpening BladeCheck Blade To Remove Blade Balance and Install Blade Filling Fuel Tank Cleaning Fuel Cap Vent Check TroubleshootingUsing Troubleshooting Chart Troubleshooting Storing Safety Storing MachinePreparing Machine for Storage Preparing Fuel and Engine For Storage Remove Mower from Storage Assembly Install Starter RopeLawnmower Assembly Side Discharge Chute Bagger Bagger Chute Identify Parts SP6211 and SP6213 Install Grass Bag Add Engine Oil Insert bagging chute tab E into rear mower shield slot F Test Mower Specifications Machine SpecificationsEngine Travel Speed Range Dimensions Recommended Lubricants Warranty Limited Warranty for NEW Scotts Brand Products Tire Warranty Limited Engine Warranty Warranted Parts Cleaning Belt and Transmission Area Index Quality Statement Step Refer to your operator’s manualStep Contact your dealer Step Call the Customer Communications Center Service Record Record Service Dates