OPERATING
H
F
G
M96559
3.If bag prevents lowering of handle, remove clip (F) to remove rod (G). Remove rod from lower position (H) and insert in upper position as shown to lengthen bag.
4.Tighten knob (C) on each side of handle.
Starting Engine
CAUTION: Avoid injury! Engine exhaust fumes can cause sickness or death.
Run engine only in a ventilated area.
If engine is run in an enclosed area, open doors to bring in outside air.
IMPORTANT: Avoid damage! To help prevent damage to recoil starter and band brake, do not start engine:
•When blade is under load, such as, in heavy grass.
•When blade control lever is released.
A
MX1568
1.Prime engine by pressing primer bulb (A):
•COLD Engine - 3 times
•WARM Engine - 1 or 2 times
CAUTION: Avoid injury! WHEN ENGINE IS
RUNNING, BLADE IS TURNING.
Keep hands, feet and clothing away from the blade.
B
M93034
2. Hold blade control lever (B) against handle.
M88828 |
3.Pull starter handle until you feel resistance. Then pull fast and steady.
4.When engine starts, return rope slowly.
Operating - 7
