2 Hawk 1LP Family Installation Guide, Rev. D
and Regulations nor the Radio Interference Regula- tions of the Canadian Department of Communications. However, the unit has been tested using proper shield- ing and grounding and found to be compliant with the Class A limits of the FCC Rules and the Regulations of the Canadian Department of Communications.
The physical design characteristics of the drive(s) described herein, serve to minimize EMI radiation when installed in an enclosure that provides reason- able shielding. As such, the drive(s) are capable of meeting the Class B limits of the FCC Rules and the Regulations of the Canadian Department of Communi- cations.
Note. It is the end users' responsibility to assure that the drive(s) described herein meet the appro- priate EMI requirements of their system. Shielded I/O cables may be required if the enclosure does not provide adequate shield- ing. If I/O cables are external to the enclosure, shielded cables should be used, with the shields grounded to the enclosure and to the host controller.
