16 | Barracuda 4LP Installation Guide, Rev. B |
[5]See “Conducted noise immunity” in the Barracuda 4LP Prod- uct Manual. The specified voltage tolerance is inclusive of ripple, noise, and transient response.
[6]Operating condition is defined as random seek read opera- tions with a block count of 64.
General Notes from Tables 2a and 2b.
1.Minimum current loading for each supply voltage is not less than 4% of the maximum operating current shown.
2.Use separate ground returns for +5V and +12V supplies.
3.Where power is provided to multiple drives from a common supply, carefully consider individual drive power require- ments. Where multiple units are powered on simulta- neously, be sure the peak starting current is available to each device.
Table 3. Dimensions of the drive
| inches | mm |
|
|
|
|
|
|
Height | 1.00 | 25.4 |
|
|
|
Width | 4.00 | 101.6 |
|
|
|
Depth | 5.74 | 145.8 |
|
|
|
Weight | 1.5 pounds (0.68 kilograms) | |
|
|
|
