Seagate ST32171N/W/WC/WD/DC, ST34571N/W/WC/WD/DC manual Mounting configuration dimensions

34 Barracuda 4LP Installation Guide, Rev. B

C [3]

[1]

G

D

F

A

[4]

L

E

Notes:

[2]

H

K

N

[4]

B

J

M

[1]Mounting holes three on each side, 6-32 UNC. Max screw length into side of drive 0.15 in.

(3.81 mm). Screw tightening torque 6.0 in-lb (.675 NM) max with minimum thread engagement of 0.12 in. (3.05 mm).

[2]Mounting holes four on bottom, 6-32 UNC. Max screw length into bottom of drive 0.20 in. (5.08 mm). Screw tightening torque 6.0 in-lb (.675 NM) max with minimum thread engagement of 0.12 in. (3.05 mm).

[3]Power and interface connectors can extend past the "A" dimension by 0.040 in. (1.02 mm).

[4]Decorative front panel (optional).

[5]Although the illustration shows the 50 pin I/O connector drive model, mounting hole locations are the same for all Barracuda 4LP models.

		Inches		Millimeters
	A	5.74	± .010	145.80± .25
	B	4.00	± .010	101.60± .25
	C	1.00	+ .021	25.40+ .53
			– .009	– .22
	D	2.362	± .010	60.00± .25
	E	.620	± .020	15.75± .50
	F	4.000	± .010	101.60± .25
	G	.250	+ .010	6.35+ .25
			– .005	– .12
P	H	1.750	± .010	44.45± .25
	J	3.750	± .010	95.25± .25
	K	2.370	± .020	60.20± .50
	L	1.00	± .010	25.4± .25
	M	4.000	± .010	101.6± .25
	N	0.19	± .010	4.83± .25
	P	0.015	max	0.381 max

Figure 6. Mounting configuration dimensions