Sears 12781, 12681, 12581, 11682 manual Prepare Your Machine For Sewing

SECTION 2. PREPARE YOUR MACHINE FOR SEWING

Set Up the Machine

Plug in the Machine and Switch on the Power

Power supply plug

•Foot Control Use

sPw°itwce_ Z _'_Power

Plu_l

connector

Machine

plug

J

NOTE: Before inserting the plug into your

machine, be sure the power switch is OFF.

Check your outlet to be sure it is a 110 to 120 Volt AC outlet.

2.Insert the machine plug into the three-prong

plug connector, as shown. It will only fit one way.

3.Insert the power supply plug into the outlet.

light

4.Push the light and power switch to turn on the power and sewing light.

SAFETY FEATURE:

Your machine will not operate unless the

light/power switch is turned on. If you are

interrupted or stop sewing, turn off the

light/power switch to prevent injury to

children.

Foot control

The foot control regulates the speed at which you sew.

To increase speed, gently press down with the ball of your foot.

To decrease speed, release your foot pres-

sure slightly.

NOTE : The foot control is sensitive and

will increase or decrease your

sewing speed immediately. Practice on a scrap of fabric to

regulate your sewing speed to your taste and needs.