Sears 12781, 12681, 12581, 11682 manual Section, Prepare Your Machine, For Sewing, the Bobbin

SECTION	2. PREPARE YOUR MACHINE	FOR SEWING
Prepare	the Bobbin
• To Remove the Bobbin Case from the Machine		• Wind the Bobbin

J

clutch knob inside the hand wheel

J

Remove the extension table from

the machine by pulling it to the

left. Open the shuttle cover by pulling down the embossed part on the left side of the cover.

Raise needle to its hi_ghest position by rotating hand wheel toward you.

To remove bobbin case from shut- tle, pul! open latch of bobbin case.

Pull bobbin case straight out of shuttle.

toward you to stop the needle from

moving while you winding the

bobbin.