Sears 12681, 12781, 12581, 11682 manual Care For Your Machine, To Replace Shuttle Assembly

"• Clean the Shuttle Race

This area must be kept free of dust, lint

•about every three months.

Center pin of the shuttle

Lever

Lever

Bobbin

case

. To Clean the Shuttle Area:

1.Raise the needle bar to its highest point and remove the bobbin case.

	Z: --	:::c	:ccc :	[ ' t :_ :=::_	"C7C7
3.	Clean the	shuttle	race	with	a lint

brush,

4.Put a drop ot oil on the center pin of the shuttle and shuttle race. Do not

over-oil.

SECTION 5. CARE FOR YOUR MACHINE

and occasional tangled thread. Clean the shuttle race area

Shuttle driver

Lever

Shuttle

CevGr i

Shuttle Race

(Oil here)	Shuttle Race
	Cover

To Replace Shuttle Assembly:

1.Position shuttle race as illustrated so that shuttle driver is forming half moon on the left side of the

"

to form a half moon on the rightside_ Pointed hook will be on the bottom.

3. Place shuttle race cover into place over shuttle assembly.

4.Snap the levers back into the original position.

37