Sears 12681, 12781, 12581, 11682 manual Pull 3 to Latch Bobbin as shown

SECTION 2. PREPARE Y_OUR MACHINE FOR SEWING

Wind the Bobbin (Continued)

7

Draw	thread from spool through	Pull end of thread through hole in
bobbin	winding tension disc as shown.	bobbin as shown.

•Insert the Bobbin into the Bobbin Case

Place bobbin onto bobbin winding

spindle with end of thread coming from the top of the bobbin. Push

bobbin winding spindle to the right until it clicks. Holding onto end of thread, start machine. When bobbin is slightly filled, snip off end of thread.

Wind thread until winder stops.

Push bobbin winding spindle to the left and clip thread. Remove bobbin. Turn clutch knob away from you while holding hand wheel for normal sewing operation.

Place	bobbin	in bobbin	case	Pull thread through slot of case	Pull	thread	under	tension	Holding	latch open, position	Case should lock into place
making sure thread feeds clock-				as shown.	spring	and through the opening			case into	shuttle and release	when latch is released.
wise	and	is coming	from		as shown above.		Pull 3 to 4		latch.
bobbin as shown.					inches of thread from			bobbin.

9