general maintenance

Keep your jointer-pianer clean, Put a carton Or some kind

of a container underneath your jointer-planer to catch the chips. The container should reach above the top of the motor.

Do not allow pitch to accumulate on the tables, the fence, the cutter guard, the cutter head or the knives, Clean them with Craftsman Gum and Pitch Remover,

Apply a thin coat of automobile-type wax to the tables and fence so that the wood slides easily while feeding.

....

• i_

DO not afl0w chips to accumulate On the underside of the jQintebpianer:

Frequently btow out any dust that may accumulate in- side the motor.

For motor maintenance, follow instructions furnished with motor.

If power cord is worn or cut, or damaged in any way, have it replaced immediately,

mubrication

The BALL BEAR INGS in this machine are packed with grease at the factory. They require no further lubrication.

The following parts should be oiled occasionally with SAE No. 20 or No, 30 engine oil.

1.Dovetail spacer and dovetail slide.

2.Elevating screw (first clean with Craftsman Gum and Pitch Remover).

DOVETAIL

SPACER AND SLIDE

ELEVATING SCREW

VIEW LOOKING UP FOR

PARTS IDENTIFICATION

25

Page 25
Image 25
Sears 113.206931, 206801 manual Dovetail, Spacer and Slide, Elevating Screw View Looking UP for Parts Identification