BATrERT
PACK
To stop,release switchtriggerand allow the chuckto come to a completestop.
_1= WARNING: Battery tools ere always in operating cond_on. Therefore, switch should always be locked
when not In use or when cerwIng at your side.
DIRECTIONOF
ROTAllONSELECTOR
(FORWARD/ REVERSE) REVERSE
BATrlERY
PORT
DEPRESSLATCHESTO
RELEASEBATTERYPACK
SWITCH
See Figure 5.
F'_.4
!
FORWARD
CENTER POSITION
(lOCK)SWITCHTRIGGER
Fig. 5
KEYLESS CHUCK
See Figure 6.
A keylasschuckhas been providedwith yourddllto allow for eas_JIr_mJlatton and ramoval ot b_ts.As the name '_las, you can hand tighten or release drill bits in the chuck jaws. Grasp and holdthe collar of thechuck withone hand. Rotate
Your ddi]starts and stops by depressing and releasingthe switch trigger. Release the switchbigger to turn ddll OFF.
VARIABLE SPEED
See Figure 5.
Your ddll has a variable speed feature in the switch. The switch delivem higher speed and torque with increased tdgger pressure. Speed is controlled by the amount of switch trigger depression.
SWITCH LOCK
See Figure 5.
The switch triggercan be locked In the OFF position.This feature helps reduce the possibilityof accidental starting when notIn use. To lockthe switchtrigger,place the direct'on of rotationselector in the center position.
the chuck body with your other hand. The arrows on the chuck indicate which directionto rotate the chuck body in order to GRIP (_ghten)or RELEASE (ur_ck) the ddll bit.
,_ WARNING: Do not hold _ chuck body with one hand and use the power ot the drill to tighten chuck
jaws on drillbits. Chuck bodycould slip in your hand or your hand could slip and coma In contact with rotatingddit bit.This could causean accidentrasu_ng in sedouspersonal injury.
RELEASE
(UNLOCK) KEYI.ESS CHUCK
REVERSIBLE
See Figure 5.
This tool is reversible.The directionof rotationis controlled
by a selector located above the switchtdgger. With the drill BIT held in normal operating position,the direction of rotation selector should be positioned to the left of the switch for drilling.The ddflingdirectionisreversedwhen the selector is
to the right of the switch. When the selector Is In center position, the switchtrigger is locked.
CAUTION: To prevent gear damage, always allow chuck
to come to a completestop before changing the directionof rotaton.
tO
GRip
(TIGHTEN)
CHUCK
COLLAR
Fig. 6
