CHUCK REMOVAL
See Figures 12 - 14.
•Lockthe swiLchtriggerbyplscingthe directionof retation selector in center position.See Figure 5.
•Insert a 5/15 inch or larger hex kay Into the chuck of your ddtt and [_ghtenthe chuck jews sscumly.
•Tap the hax key sharply with a mallet in a clockwise direction.See Figure 12. This will loosen the screw In the chuck for easy removal.
•Open chuck jaws end remove hex key, Remove the chuck screw by turningit In a ctuck_se direcffon. See Figure 13.
Note: The screw has left hand threads.
•Inserthex key Inchuck end tightenchuck _ws securely. "Tapsharp!,ywith e ma]_,ain e counterclock_se direction.
This will loosen chuck on the spindle, tt can now be unscrewed by hand. See Figure 14.
CHUCKJAWS
\
Fig, 12
Fig. 13
TO RETIGHTEN A LOOSE CHUCK
The chuck may become iocse on spindle and develop a wobble. Periodicallycheck the chuck screw for tightneSs.
To tighten,followthese steps:
•Lockthe switchtriggerby piecing the direct_n ofrotation selectorIn center position. See Figure 5.
•Open the chuck jaws.
•insert hex key into chuck and tighten chuck jaws securetyTap. hex key sherptywith a mallet in a clockwise direction,This will_ighten chuck on the spindle.
[] Open the chuck Jawsand remove hax key.
•"Tightenthe chuck screw.
Note: The chuck screw has left hand threads.
Fig.
t4
