Sears 315.10186 manual Switch Trigger

PRODUCTSPECIFICATIONS

Chuck	3/8 in. (10 ram) Keyless
Motor	14.4 Volt DC
Switch	Vadab[e Speed
Gear Train	1 Speed
No Load Speed	0-6501min.

KNOW YOUR DRILL-DRIVER

See Figure 1,

Before attempting to use your ddll-ddver,familiarize yourself with all operating features and safety requirements.

WARNING: Carefully read throughttdsentire operator'smanual before usingyour new dhlt-dr'rvar. Pay close attention to all Salety Rules, Warnings and

Cautions. It you use your drill-driverpropertyand only for what it Is Intended, you will enjoy years of safe, reliable service.

,_ WARNNG: Do not allowJamiliaritywith your rid}l- driver to make you careless. Remember that a careless traction o1a second Is suff_em to Inflict severe injury.

KEYLESS CHUCK

Yourdrift-driverhas a keylesschuckthatallowsyou to hand _ghten or releasedrillbit in the chuckjeers.

DIRECTION OF ROTATION SELECTOR FORWARD/REVERSE

Yourdrill-driverhas a forward/reverseselector located above t_e sw}tchtrigger.The sw_chtdgger can be locked in the OFF position.

C[utoh		4 Positions
Charger input	_	120 V. 60 Hz, AC only
Charge Rate		3-6 Hours
Torque		90 In.lb.

SWITCH TRIGGER

To turn your drill.driverON, depressthe switchtrigger. Release switchtrigger to turnyour drill-driverOFF.

VARIABLE SPEED

This tool has a variable speed switch that delivers higher speed with increased triggerpressure.Speed is controlled by the amount of switch tdgger dapmse)on.

BIT STORAGE

When not In usa, bits pro'tidedwith your clflfl-drivarcan be placed _ the storage area locatedon the top of the motor housing.

TORQUE ADJUSTMENT RING

Your drill Is equipped with an adjustabletorque rk'vgfor drivingdifferenttybes of screws intod_farent rnaterials. The proper settingdepends on the type of material and the size of the screw you are using.