r

SERVICE AND ADJUSTMENT

HOW TO REMOVE THE MOWER HOUSING

1 Move _he lift lever to the MIDDLE position

2 Move the blade engagement control lever [o the DISENGAGE position

3Disconnect the blade drive link from the pivol rod and

bracket assembly See illustration C below

4Remove [he hair pins thai hold time hangers Io the adius[er

plates See illustrabons A'and'B below

5Move [he mower housing to the left until the right side hanger sepa[ates from the adjuster plate Then move [he

mower housing to the right ungt the left side hanger separates from the adjuster plate

6Remove the long pin from the front suspension bracket See

illustration 'D" below

7Remove the mower drive belt from the s[ack pulley Slide the mower drive belt beIween _he stack pulley and the belt guide

8Comple:e[y Iurn the steering wheel to the bghi Pull the mower housing away from the left side of the unit

HOW TO INSTALL THE MOWER HOUSING

1Completely turn the steering wheel Io [he right Push [he mower housing under time left side of the unit

2Slide the mower drive belt belween the stack pulley and the

beltguide PuIthemowerdrivebellaroundthestackpulley

Make surethe"V side of the mower drive belt is against the stack pulley Make sure the drive belt is not twisted

3AItach the mower housing to the front suspension bracket with the long pin Fasten with the washer and hair pin See

illustration "D" below

4Attach the rear hangers [othe adiuster plates Fasten with

the hair pins See illustrations"A"

and"B"

below

5Connect the blade drive link to the pivot rod and bracket assembly Fasten with a clevis pin and a hair pin See illustration C below

6Move the blade engagement control lever to the ENGAGE posibon Make sure the mower drive belt is inside all the be_t guides

7Check the operation of the blade engagement control lever

See the instructions on How To Adiust The Blade Engagement Conlrol Lever

8Make sure the mower housing islevel See_he;nstructions

How To Level The Morner Housing in the maintenance sectEon of this book

lade Enqagemen[ Con rol

Long Pm

\

2 =iS= :

Blade

Drive

Link

F-92533

26

Page 26
Image 26
Sears 502.25502 manual Service and Adjustment, HOW to Remove the Mower Housing, HOW to Install the Mower Housing