Sears 625.34929 What does Your Solutjo, Following briefly describes each of these water problems

I SAFETY GUnDES

A Read all steps, guides and rules carefully before installing and using your new Solution Dispensing System. Follow all steps exactly to correctly install. Failure to follow them could cause personal injury or property damage. Reading this book will also help you to get all of the benefits from your dispensing system.

A Protect the Solution Dispensing System and tubing from freezing. Damage from freezing voids the warranty.

A Check with your local public works depart-

ment for plumbing, electric and sanitation codes. You must follow their guides as you install your dispensing system.

A Be sure the electric outlet for the solution pump is grounded the right way to protect the user from injury or possible fatal shock.

When you see this sign in the book, A something could be damaged, or someone hurt if theguideisnot followed exactly.

WHAT DOES YOUR SOLUTJO

Water is one of the best soSvents known to man, It

dissolves and picks up part of everything it touches_ As water filters through the earth and rock strata, it absorbs minerals such as calcium,

magnesium, iron and hydrogen sulfide (rotten egg odor), If the water is not treated and improved in some way, it may be useless, Feeding solutions into the water is a good way to treat the water.

Your Sears Solution Dispensing System treats the following kinds of water problems, DO NOT USE

THE SYSTEM IN AN ATTEMPT TO PURIFY POLLUTED WATER.

(1)IRON WATER -- MAX. 20 PPM

(2)HYDROGEN SULFIDE WATER -- MAX, 20 PPM

(3)ACID WATER -- 4.0 pH and ABOVE.

(4)ACID WATER AND IRON BACTERIA, HYDROGEN SULFIDE, OR HIGH AMOUNTS OF IRON -- MAX. 20 PPM TOTAL and 4.0 pH.

The following briefly describes each of these water problems

(1)IRON WATER --One of the most common

elements in the earth's crust, iron causes water problems all over the world. It makes rust stains

on almost everything it touches, gives water a

metal taste and causes many other problems_ The 2 main forms of iron are FERROUS and FERRIC

Ferrous or CLEAR WATER iron is the most common type. Water with ferrous iron is clear when taken from a fauceL After standing for 15 to 30 minutes, the water turns to a yellow or brown color.

Ferric or RED WATER iron is rusty or brown as it's taken from the faucet, After standing for awhile the iron will settle out.

BACTERIAL iron is another kind of ferric iron. When this water is taken from a faucet and left

standing for several hours, it forms slimy, stringy, mud-like clumps.

TREATING IRON WATER -- Adding chlorine to the water and then filtering it is a good way to remove both the ferrous and ferric forms of iron, Chlorine also kills iron bacteria. A Sears Solution

Dispensing System feeds household laundry bleach into the water system ahead of the pressure tank, The chlorine in the bleach oxidizes the iron.

Then a Sears Automatic Clarifier and a Sears

(NOTE: BACTERIAL IRON and IRON BACTERIA are the same )

3