oSlide the Front Upright (76) over the two 5/16" x 2 1/2" Carriage Bolts (22) in the Base (69). Attach the Front Upright with two 5/16" Nylock Nuts (4). Do not fully tighten the
Nylock Nuts until completeing step 24.
. Place the Top Brace (86) on top of the Front and Rear Uprights (76, 74). Attach the brack- et on the Top Brace to the Front Updght with a 5/16" x 2 3/4" Bolt (3), 5/16" Washer (10) and 5/16" Nylock Nut (4). Do not fully tight-
en the Nylock Nuts until completeing step 24.
Attach the Top Brace (86) to the Rear Upright
(74)with two 5/16" x 2 3/4" Bolts (3) and 5/16" Nylock Nuts (4). Do not fully tighten the Nylock Nuts until ¢ompletelng step 24.
,Press a 1 3/4" x I 3/4" Inner Cap (28) into
3/4" Round Inner Cap (30) into each side of the Arm Support.
Apply grease to the rod of the Arm Support (85).
Tum an Arm Support Bushing (92) so the rounded groove is on top. Place the Arm Support Bushing on top of the plate on the Top Brace (86). Rest the rod of the Arm Support (85) in the rounded groove in the Arm Support Bushing.
. Place the other Arm Support Bushing (92) on top of the rod of the Arm Support (85). Place the Bushing Bracket (91) over the Arm Support Bushings, Attach the Bushing Bracket to the plate on the Top Brace (86) with four 1/4" x 3/4" Screws (24) and 1/4" Nylock Nuts (23).
4
5
6
86
7
24
23
