40.Press a 1 1/2” Square Inner Cap (32) into the Leg Lever (29).
Lubricate the 5/16” x 2 1/4” Bolt (33). Attach the Leg Lever (29) to the Seat Frame (36) with the Bolt and a 5/16” Nylon Locknut (3).
Do not overtighten the Nylon Locknut. The Leg Lever must be able to pivot freely.
Insert the 5/16” x 2” Eyebolt (35) into the Leg Lever
(29)from the direction shown. Tighten a 5/16” Nylon Locknut (3) with a 5/16” Flat Washer (8) onto the Eyebolt.
41.Rest the Butterfly Seat Frame (36) on the indicated pin (A) in the Butterfly Upright (42). Attach the Butterfly Seat Frame to the Butterfly Upright with a 5/16” x 2 3/4” Carriage Bolt (14) and the Seat Knob
42.Press two 3/4” Round Inner Caps (34) into each Pad Tube (28).
Insert one Pad Tube into the Butterfly Seat Frame (36). Slide a Foam Pad (30) onto each end of the Pad Tube.
Insert the other Pad Tube into the Leg Lever (29). Slide a Foam Pad (30) onto each end of the Pad Tube.
Miscellaneous Assembly
43.Leg Press Assembly
Attach the Leg Press Plate (87) to the Adjustment Tube (88) with a 5/16” x 2 1/2” Bolt (22), two 5/16” Flat Washers (8) and a 5/16” Nylon Locknut (3).
Make sure the Leg Press Plate and the Adjustment Tube are oriented as shown.
Press a 1 3/4” Square Inner Cap (44) into the Adjustment Tube (88).
40 |
| 36 |
|
|
|
| |
|
| 3 |
|
33 Lubricate |
| 29 |
|
|
|
| |
|
| 8 |
|
35 |
|
|
|
| 32 | 3 |
|
|
|
| |
41 |
|
|
|
|
| 42 |
|
|
| 40 |
|
|
| 36 |
|
|
| 14 |
|
A |
|
|
|
42 | 36 |
|
|
|
|
| |
|
| 30 | 34 |
|
| 28 |
|
| 30 |
|
|
34 |
|
|
|
|
| 29 |
|
43 |
|
|
|
| 88 | 3 |
|
87 |
|
| 44 |
8 |
|
| |
22 |
|
| |
|
|
|
17
