5.Press a 1” Square Inner Cap (65) into the side arm
(A) on the Press Upright (56).
Slide the Press Upright (56) onto the 5/16” x 2 1/2” Carriage Bolts (1) in the Press Base (51). Hand tight- en a 5/16” Nylon Locknut (3) onto each Carriage Bolt.
Do not tighten the Nylon Locknuts yet.
Note: The Press Upright (56) must be leaning towards the center of the unit with the side arm facing outward.
6.Slide the Butterfly Upright (42) onto the 5/16” x 2 1/2” Carriage Bolts (1) in the Butterfly Base (4). Hand tighten a 5/16” Nylon Locknut (3) onto each Carriage Bolt.
Do not tighten the Nylon Locknuts yet.
Note: The Butterfly Upright must be leaning towards the center of the unit.
5 |
65 |
A |
56 |
3 |
3 |
51 |
1 |
6 |
42 |
3 |
3 |
4 |
1 |
6
