37.Attach the other end of the Seat (13) to the Press Seat Frame (77) with a 1/4” Flat Washer (10) and a 1/4” x 2 1/2” Screw (43).
38.Move to the other end of the unit. Attach the remain- ing Backrest (41) to the Butterfly Upright (42) with two 1/4” x 2 1/2” Screws (43) and two 1/4” Flat Washers (10).
39.Press a 1 1/2” Square Inner Cap (32) into the Butterfly Seat Frame (36).
Insert the 1/4” x 2” Carriage Bolt (38) into the center hole in a Seat Plate (37).
Attach the Seat Plate to the Seat (13) with two 1/4” x 3/4” Screws (18).
Insert the 1/4” x 2” Carriage Bolt (38) into the indicat- ed hole in the Butterfly Seat Frame. Tighten a 1/4” Nylon Locknut (2) with a 1/4” Flat Washer (10) onto the Carriage Bolt.
Attach the other end of the Seat to the Butterfly Seat Frame with a 1/4” Flat Washer (10) and the 1/4” x 2 1/4” Screw (24).
37 | 77 | 13 |
| |
|
| |||
|
|
|
| |
| 10 |
|
|
|
|
| 43 |
| |
38 |
|
|
|
|
|
|
|
| 42 |
|
|
|
| 41 |
| 43 |
| 10 |
|
39 |
|
|
| 13 |
|
|
|
| |
| 36 |
|
| 38 |
|
|
| 37 |
|
|
|
|
| 18 |
| 10 |
|
| 32 |
| 24 |
| 10 | 2 |
16
