4, CHECK BRAKE OPERATION
This tractor is equipped with an adjustable brake system mounted on the right side of the transaxle (Fig., 27).
tF TRACTOR REQUIRES MORE THAN
SIX FEET STOPPING DISTANCE tN
HIGHEST GEAR, THEN BRAKE MUST
BE ADJUSTED,,
NOTE: PARKING BRAKE MUST BE DISENGAGE D AND GEAR SHIFT LEVER IN NEUTRAL WHILE MAKING
ADJ USTM ENT.,
ao Depress
Nut "A" on Brake Rod
. | . |
| than 1 - | 1/2 | I) | , | loosen Jam | Nut | (Fiq. |
| |||
c. if distance | ts other |
|
|
| |||||||||
| • | is | A | t_ | . | , |
|
|
| t - | 1/2 | /3 | . |
27) and turn NUt |
|
| untd | d_stance becomes |
| ||||||||
Retighten | Jam Nut | aga* | nst Nut irl | A | j ,, |
|
|
|
| ||||
Road test tractor for proper stopping distance as stated above.. Readjust if necessary=
BRAKE
JAM NUT
BRAKE ROD \0 ........
OPERATING ARM
1.1/2-
0
O, CBBAK
F1GURE 27
G3
DAILY OR EVERY HOURS
CHECK ENGINE OIL LEVEL
DO NOT CHECK ENGINE OIL LEVEL
WITH ENGINE RUNNING.
Several minutes after stopping Engine, check Engine Oil
Level with Tractor on level ground,, Remove and wipe Dip- stick clean (Fig, 29), screw it in tight for a few seconds, re- move slowly and read Oil level. If necessary, add Oil until "FULL" mark is reached DO NOT OVERFILL
ENGINE | OIL | AIR |
FILLER | CAP | COVER |
AND DIPSTICK |
| |
\
FOAM ELEMENT
6vs.v .=..s
(OPERATING IN DUSTY CONDITIONS MAY REQUIRE MORE FREQUENT SERVICING)
1.CLEAN AIR CLEANER ELEMENT (FIG. 28)
ao Open Hood,
b. Snap off Air Cleaner Cover°
c,. Remove Foam Element from Air Cleaner Body.
d. Wash Foam Element in liquid detergent and water to remove dirt..
eo Wrap foam in cloth and squeeze dry.
f_ Saturate foam in clean engine oil Squeeze to remove excessoil=
g,, Replace Foam Element and snap Cover on Air Clean- er Body,
NOTE: NEVER RUN ENGINE WITH AIR CLEANER RE- MOVED.
2. CHANGE ENGINE OIL
The best time to change Engine Oi{ is at the end of a day's operation when all dirt and foreign materiafs are suspended in the hot Oii_ See oil chart, page 7
AIR
CLEANER
BODY
FIGURE 28
