2. Attach the Upright (77) to the Base (80) with two | 2 | |
3/8" x 5 1/2" Screws (5), two 3/8" Star Washers | ||
| ||
(8), and a 3/8” x 2 3/4” Screw (17) with a 3/8” |
| |
Star Washer (8) as shown. Start all three | 77 | |
Screws, and then tighten them. Be careful | ||
not to pinch the Upright Wire (not shown) in |
| |
the Upright. | 5 | |
Attach the other Upright (not shown) as de- | ||
| ||
scribed above. Note: There is not a wire on the |
| |
left side. |
| |
| 8 | |
| 17 | |
| 8 | |
| 80 | |
3. Set the Console (37) face down on a soft sur- | 3 | |
face to avoid scraching the Console. Remove | ||
and discard the four screws (A) from the | A | |
Console Base Back (89). Lift off the Console |
| |
Base Back. |
| |
| 89 | |
| A | |
| 37 |
8
