808 | Enabling/Disabling Keys, Display and Sounder |
Enabling/Disabling Keys, Display and Sounder
5.Press ‘Enter’.
LED 2 lights and the display shows the status of the keypad sounder: 0
for sounder ‘ON’ or 1 for sounder ‘OFF’, for example: | 2- 0 |
6.Change the keypad sounder status as required by entering 0 or 1. (The keypad sounder is normally left at ON = ‘ZERO”).
7.Press ‘Enter’.
LED 3 lights and the display shows the current status of the keypad
8.Change the back light status as required by entering 0 or 1.
9.Press ‘Enter’.
LED 4 lights and the display shows current keypad keys status: 0 for
Active or 1 for Inactive, for example: | 4- 0 |
10.Change the keypad status as required by entering 0 or 1. (The keypad keys are normally left active = ‘ZERO’.)
11.Repeat 1 to 10 for any other keypads connected.
12.Set the ‘Prog’ switch to OFF and remove power to the keypads to lock the address and options into the keypad(s).
496336 Issue 1 | 5 of 22 |
