Security Centres 808 manual Re-enteringProgramming Mode, Engineer Reset

Re-entering Programming Mode		808
2.	Press Menu.
	If the end station lid is open, the displays shows:	REPLACE LID
3.	Close the end station lid.
	If no faults are present the display shows the
	time:	09:00
	If faults exist, the display will show, for example:	CANT EXT
		01 FLTS
		REVIEW FAULTS

4.Use the up and down arrow keys to view faults present on the system. Remedy the faults, then press Menu until the display returns to the time and date.

If the display shows a "CFG ERR" (configuration error),

for example: CFG ERR A IN LA

Then see "Fault Finding" for an explanation of the fault and how to correct it.

Re-entering Programming Mode

To enter Installer Programming Mode:
The display shows the time:	12:15

1.Key-in 0 (zero) followed by the Installer code (default 7890), then press Menu.

	The display shows:	MENU NO OR LEVEL
2.	Press 0.
	The display shows:	0:INST PROG
3.	Press Enter.
	The display shows	REMOVE LID

4.Remove the end station lid.

The display shows: 00:PROG SYSTEM

You have now reached the Installer programming mode.

Engineer Reset

If you wish to perform an Engineer Reset without removing the end station lid, type-in 0 (zero) + Engineer Code, (default 7890) then press Enter.

16 of 22 496336 Issue 1