9. Bar code and enlarged character
(3) Executing form feeding: FF |
|
|
Format: | ASCII | FF |
| Hex | 0C |
| Decimal | 12 |
Function: | Executes form feeding. | |
This command feeds the page to the next TOF position. If there are still enlarged characters to be printed, they are printed, then form feeding is executed.
(4) Executing carriage return: CR |
|
|
Format: | ASCII | CR |
| Hex | 0D |
| Decimal | 13 |
Function: | Executes carriage return. | |
This command moves the printing position to the left margin without printing any characters. If the CR SETTING option is set to CR + LF in the EXTENDED SETUP MODE, a carriage return is executed out after printing.
(5) Initializing the enlarged character mode: DC4 DC4 @ |
|
| ||
Format: | ASCII | DC4 | DC4 | @ |
| Hex | 14 | 14 | 40 |
| Decimal | 20 | 20 | 64 |
Function: | Initializes the enlarged character mode. | |
The following show the default settings for enlarged characters: | ||
Cell expansion: | SETUP expansion | |
Height expansion: | SETUP expansion | |
Width expansion: | SETUP expansion | |
Font: |
| SETUP font |
Character pitch: | 10 cpi | |
HMI: |
| Invalid |
Cell offset: | 6/180” | |
VMI: |
| Invalid |
Character quality: | Standard | |
Character layout: | Adjusted to the base line | |
Rotational angle: | 0° | |
Smoothing: | Valid | |
Top offset: | 0/180” | |
Underline: | Canceled | |
Character set: | Enlarged character mode selected | |
Right and left margins: | Enlarged character mode selected | |
Page length: | Enlarged character mode selected | |
Top and bottom margins: | Enlarged character mode selected | |
84
