Seiko BX-900 owner manual Specified items on Bar Code, Bar Code command

9. Bar code and enlarged character

Specified items on Bar Code

	Inter Character Gap		Height
(Example) CODABAR
START	Wide Space	STOP	Barcode
Character		Character
	Narrow Space
Wide Bar		Check Character

Narrow Bar HRI

Bar Code command

	Function	Command
1.	Bar code type	DC4 DC4 T
2.	Element width	DC4 DC4 E
3.	Bar code height	DC4 DC4 H
4.	Setting HRI on and off	DC4 DC4 I
5.	HRI font	DC4 DC4 F
6.	Check character	DC4 DC4 C
7.	Starting the bar code data sequence	ESC SI
8.	Ending the bar code data seqence	ESC SO
9.	Bar code data sequence	DC4 DC4 B
10.	Printing density	DC4 DC4 D
11.	Guard bar expansion	DC4 DC4 G
12.	Start and stop characters	DC4 DC4 N
13.	Bar code rotational angle	DC4 DC4 R
14.	Disabling HRI of the start and stop characters	DC4 DC4 S
15.	Value input mode	DC4 DC4 V
16.	Initializing the bar code mode	DC4 DC4 @

(1) Bar code type: DC4 DC4 T

Format: ASCII	DC4	DC4	T	n
Hex	14	14	54	n
Decimal	20	20	84	n

Function: Specifies the bar code type

n =0	Industrial 2 of 5	7	Code128
1	Interleaved 2 of 5	8	EAN-8
2	Matrix 2 of 5	9	EAN-13
3	Codabar	10	UPC-A
4	Code11	11	UPC-E
5	Code39	12	Postnet
6	Code93	255	Element Print

Parameter 255 (Element print) is used to print a bar code which is input element by element. It can print a bar code which is not supported by the printer and is represented by combining elements. Since data is input by elements, HRI printing is not performed and no check digit is added to the bar code. The start and stop characters is also not added.

70