3.Control panel and operations

M.LF/M.RLF (Micro line feed/micro reverse line feed)

M.LF

M.RLF

When the M.LF/M.RLF key is pressed, the paper is fed 1/360 inch forward or backward, respectively. This key is used to set the paper position.

To set the TOF SET (top-of-form set) function, press the FF key and then simply advance the loaded paper forward or reverse to your desired print position using the M.LF/M.RLF keys. Hereafter until you reload paper, the first print position of the form is always fed at the same place.

TEAR OFF [Used only for fanfold paper]

Pressing this key advances the perforation of the form to the paper cutter so that the leading form can be torn off from the rest.

TEAR OFF

PARK

TOF SET

PARK

BIN

BIN

EXIT

SETUP

+

ENTER

ALT

If this key is pressed after the form is torn off, the paper is fed backwards and the mode is returned to offline. If the ON LINE key is pressed instead of the TEAR OFF key, the paper is fed backwards and the mode is changed to the online mode.

(Paper parking)

Pressing this key unloads the paper if the paper is already loaded.

Fanfold continuous paper (paper select lever in fanfold setting)

The paper is moved to the park station in the back of the printer by pressing this key.

Single sheet paper (paper select lever in single sheet setting)

The paper in the print station will be ejected.

(ALT+SETUP keys)

This key is for selecting the active paper tray of the cut sheet feeder or the

paper feed type:MANUAL, BIN1, BIN2 or BIN1+2. BIN1, BIN2, BIN1+2 appears only when the cut sheet feeder (CSF) option is set.

Note

The paper select lever must be switched to the single sheet setting.

18

Page 26
Image 26
Seiko BX-900 owner manual Park