AN.No.G1216B1N000-3D0E
1.GENERAL
1.1General
The G1216 is a very thin LCD module on which a full-dot matrix LCD panel and a CMOS IC driver are integrated. The LCD panel used here features wide viewing angle and high contrast. This full dot configuration allows a wide variety of patterns to be displayed depending upon the input data. The display position is the intersection point of the matrix transparent electrodes. This prevents display distortion and displacement. Incorporating a display RAM and a display timing signal generator into the G1216 allows for direct connection with the MPU circuit without using an LCD controller.
1.2Features
12864 full dot matrix configuration
1/64 duty, 1/9 bias
Two 4096-bit internal display data RAMs
An internal display timing signal generator
8-bit parallel interface
Instructions:
Display Data Read/Write, Display ON/OFF, Display Start Line, X-Address (Page) Set, Y- Address Set, and Status Read.
Three types of power supply: VDD=+5 V, VLC , LEDA (LED anode)
Transflective, gray mode
Positive display
Display data “H”: Display ON: blue display color
Display data “L”: Display OFF: gray background
A wide operating temperature range
A built-in LED backlight (color: yellow-green)
