Sennheiser EK 300 IEM G3, 300 IEM Series manual 10

Product overviews

Overview of the displays of the EK 300 IEM G3 diversity receiver

After switch-on, the diversity receiver displays the standard display “Frequency/Name”. For further illustrations and examples of the different standard displays, refer to page 18. The standard display displays the operating states of the diversity receiver. The display backlighting is automatically reduced after approx. 20 seconds.

						519.150MHz
						ew300 IEM
					AF	P MUTE
				RF
Display	Meaning
 RF level “RF”			Diversity display:
(Radio Frequency)			Antenna input I is active
			Antenna input II is active
			RF signal level:
			Field strength of the received signal
		RF	Squelch threshold level
 Audio-Pegel „AF“			Peak hold function
(Audio Frequency)			Modulation of the transmitter (channel-separated when the transmitter is set to
			stereo mode)
			When the display shows full deflection, the audio input level is excessively high.
		AF
 Frequency	Current receiving frequency
 Name	Freely selectable name of the receiver
 Lock mode icon	Lock mode is activated (see page 18)
 Battery status	Charge status:
			approx. 100%
			approx. 70%
			approx. 30%
			charge status is critical, the red LOW BATT LED  is flashing:
 Muting function	“Mute” is only displayed on the “Frequency/Name” standard display (see page 18)
“MUTE”	• when the transmitter’s RF signal is deactivated

•or when the transmitter is set to mono mode and therefore does not transmit a pilot tone but the receiver’s pilot tone evaluation is activated.

or audio channels	The audio channels are only displayed on the “Frequency/Limiter” and “Frequency/High
	Boost” standard displays (see page 18)
	Stereo
	Focus

Pilot tone “P” Activated pilot tone evaluation

8