| Using the operating menus | |
|
|
|
|
|
|
Display | Function of the menu item |
|
Warnings | Activates/deactivates the warning messages (color change and warning messages) |
|
LCD Contrast | Adjusts the contrast of the display panel in 16 steps |
|
Reset | Resets the transmitter |
|
| When resetting the transmitter, only the selected settings for the pilot tone and for the |
|
| frequency banks “U1” to “U6” remain unchanged. For an overview of the |
|
| settings, refer to the supplied frequency information sheet. |
|
Adjusts the IP address of the transmitter |
| |
Software Revision | Displays the current software revision |
|
Exit | Exits the extended menu “Advanced Menu” and returns to the main menu |
|
“Warnings” |
|
|
|
|
|
AF Peak | Audio overmodulation |
|
RF Mute | RF signal is deactivated |
|
Exit | Exits the submenu “Warnings” and returns to the extended menu “Advanced Menu” |
|
Operating menu of the EK 300 IEM G3 diversity receiver | ||
|
|
|
Display | Function of the menu item |
|
Main menu “Menu” | ||
|
|
|
Squelch | Adjusts the squelch threshold, adjustment range: 5 to 25 dBμV, adjustable in |
|
| switched off |
|
|
|
|
| CAUTION! Danger of hearing damage and material damage! |
|
| If you switch the squelch off or adjust the squelch threshold to a very low value, loud |
|
| hissing noise can occur in the receiver. The hissing noise can be loud enough to cause |
|
| hearing damage or overload the loudspeakers of your system! |
|
| Always make sure that the squelch is switched on (see above). |
|
| Before adjusting the squelch threshold, set the volume of the headphone output to |
|
| the minimum. |
|
| Never change the squelch threshold during a live transmission. |
|
| Special function (for servicing purposes only): |
|
| With the squelch threshold set to “5 dB”, you switch the squelch off by keeping the DOWN rocker |
|
| button pressed for 3 seconds. If you then press the UP rocker button, you switch the squelch on |
|
| again. |
|
Easy Setup | Scans for unused frequency presets, releases and selects frequency presets |
|
Frequency Preset | Changes the frequency bank and the channel |
|
Name | Enters a freely selectable name |
|
Balance | Adjusts the balance |
|
Mode | Selects stereo or Focus mode |
|
High Boost | Activates/deactivates the treble boost |
|
Auto Lock | Activates/deactivates the automatic lock mode |
|
Advanced | Calls up the extended menu “Advanced Menu” |
|
Exit | Exits the operating menu and returns to the current standard display |
|
|
|
|
25