￿
–

Using the devices

Carrying out an Easy Setup Sync or a Sync function

The following assumes that you are using the Easy Setup Sync function for setting up a multi- channel system. You can also you the Easy Setup Sync function for establishing a transmission link between one transmitter and one EK 300 IEM G3 receiver.

Easy Setup Sync

Sync

￿Switch all transmitters and one diversity ￿ Switch your transmitter and your diver-

receiver on.

sity receiver on.

￿On all transmitters, call up the “Easy ￿ Press the button on the trans-

Setup” menu item.

mitter.

 

The text “Easy Setup Sync” and the

The

icon appears on the display

icon appear on the display panels of the

panel of the transmitter.

transmitters. The RF signal of the trans-

 

 

mitters is automatically deactivated.

 

 

￿ Use your diversity receiver to perform a frequency preset scan (Scan New List).

￿Select a channel within a frequency bank with a sufficient number of unused channels (Current List).

￿Place the infra-red interface of the ￿ Place the infra-red interface of the

receiver in front of the infra-red inter-

receiver in front of the infra-red

face of the first transmitter.

interface of your transmitter.

The first unused frequency preset is

The current frequency bank and channel

transferred from the receiver to the

setting as well as the parameters

transmitter.

adjusted via the “Sync Settings” menu

As soon as the transfer is completed, the

item are transferred from the transmitter

display panel of the transmitter displays

to the receiver.

the numbers of the transferred frequency

When the transfer is completed, “ ”

bank and channel.

appears on the display panel of the trans-

Please note that the transmitter does not

mitter. The transmitter then switches

store the frequency bank and channel

back to the standard display.

setting. The RF signal remains deacti-

The transferred parameters are automat-

vated.

ically adjusted and stored by the receiver.

 

The transmission link between transmit-

 

ter and receiver is now established.

 

 

￿ Place the infra-red interface of the

–

diversity receiver in front of the infra-red

 

interfaces of the remaining transmitters,

 

one after the other.

 

In each case, the next unused frequency

 

preset is transferred from the receiver to

 

the transmitter.

 

 

 

21