Using the devices

Easy Setup Sync

Sync

Either:–

￿Store the frequency bank and channel setting by pressing the jog dial on your transmitters.

The RF signal is activated. You can carry out the Sync function (see right-hand column) at a later time to establish a transmission link between transmitters and receivers.

Or:–

￿Immediately synchronize your receivers with your transmitters by carrying out the Sync function (see right-hand

column). The icon in the left lower corner of the transmitter display indicates

that the Sync function can be carried out. The transmission link between transmit- ters and receivers is established.

–

To cancel the transfer:

 

￿ Press the STANDBY button on the

 

transmitter.

 

“ ” appears on the display panel of the

 

transmitter. “ ” also appears if no suit-

 

able receiver was found.

 

 

22